Product Description
The MAC112B-1-GD-3HC/130-A-0/S005 Bosch Rexroth AC servomotor is delivered without a blocking brake and an encoder. This motor is capable of rendering maintenance-free operation. The product can withstand extreme loads because of its surface cooling. This device has a tacho voltage of 1.5 V/1000 min-1. The unit has separate flanged sockets with connectors for its power and tacho feedback cables. Its operating temperature must not exceed 55 degrees C. This motor comprises an output shaft with a keyway as per DIN 6885-1 specifications.The product has an overall length of 462 mm. This device incorporates a mounting flange with a standard pilot diameter of 130 mm. The unit can be installed vertically with the output shaft facing upward or downward. It must be used only with a drive controller from other manufacturers.
This motor comes with its power connector to side A. The product has standardized electrical connections. This device uses an axial blower for the surface cooling action.The motor has two M8 tapped holes on its housing to insert the lifting screws. This unit cannot be operated for residential applications. Its blower must be connected as per the guidelines specified in its documentation. The product has a rating plate attached to its housing. This device has an IP 65 protection rating for its power and tacho feedback cables. The unit is balanced with a 10 x 8 x 50 matching key that must be bought separately. Its mounting flange encompasses throughholes or windings according to its design. This AC servomotor must not be lifted by holding its blower.
Wake Industrial Warranty
