Product Description
The motor MAC112B-0-PD-2-C/130-A-1/S005 model's IP65 protection rating and F insulation class make it suited for several applications in harsh situations. The model's enclosure distributes heat through natural convection during operation.
During natural cooling, the servo motor provides a continuous torque of 18.2 Nm and requires a constant current of 21 A. The MAC AC servo motor features a 130 mm centering diameter and a power connection on its housing's A side. The highest speed of the motor is 1500 revolutions per minute, and it weighs 36 kilograms. Even if positioned at a height of one thousand meters above mean sea level, the model's performance will not be compromised. The MAC112B servo motor is fitted with tacho feedback for precise control. The thermal time constant of the model is 90 minutes, and it must be used between 0 and +45 degrees Celsius. The model must be used with the accessories and attachments mentioned by Bosch Rexroth. The model can be installed at a maximum height of 1000 meters above sea level without degradation in the performance. The model comes with a 24 V standard holding brake. The holding brake has a holding torque of 14 Nm and a nominal current of 0.75 A. The brake weighs 11 kg and has clamping and release delays of 30 and 70 respectively.
The model MAC112B-0-PD-2-C/130-A-1/S005 has resistance and inductance values of 0.450 ohms and 6.3 mH, respectively. Permanent magnets give the motor an inertia of 120 x 10-4 kgm2 moment of inertia. It may only be installed and operated by a trained specialist with previous experience in the area. The model has a maximum peak of pulse current of 97 A and a torque constant of 0.910 Nm/A.