Product Description
The MAC112B-0-LD-2-C/130-B-1/S001 AC servomotor by Bosch Rexroth and the manufacturer's drive controller work together in a drive system. This servomotor features a black prime coat on its housing. The product must not have fluid accumulation around the output shaft with vertical mounting when the shaft faces upwards. This device features a standard type tacho. The unit houses a 45 Nm standard holding brake. Its permanent magnets are embedded in a laminated core. The motor does not need a blower to implement its cooling action through natural convection.The product depends on its tacho feedback for the rotor position recognition as well as speed evaluation per tacho-generator. This device has a totally enclosed housing. The unit can be used under poor or adverse environmental conditions. It is noted for its brushless design and bearings that are lubricated for a lifetime. This motor has an overall length of 462 mm.
The product incorporates a cylindrical shaft end as per DIN 748 specifications on its output shaft. This device features a tolerance class of N. The unit uses either an angle or a straight connector for feedback. Its power and encoder connectors have to be bought separately.This motor is meant to be picked up using a crane and belts. The product should never be lifted by holding onto the output shaft. This device must be free of impact and heavy loads on its shaft. The unit has to be grounded to the drive amplifier when it is mounted or commissioned. Its lifting screws can be used to hold the motor in place with suitable lifting equipment. The AC servomotor should neither be tipped nor dropped during storage or transport.
Wake Industrial Warranty
