MAC112B-0-LD-2-C/130-B-0/S001

Product Description

The MAC112B-0-LD-2-C/130-B-0/S001 AC servomotor delivered by Bosch Rexroth must be handled only by qualified and trained personnel. This servomotor comes with spigot nuts on its connectors that must be tightly screwed in place The product should be stored as well as transported only in the horizontal orientation. This device has two tapped holes on its housing to insert lifting screws as per DIN 580 specifications. The unit should be free of load when it is being transported. Its type plate attachment on the housing helps in its identification and procurement of spare parts when needed. This motor uses connection cables that have an IP 65 protection rating.The product has a nominal speed based on the drive that is connected to it. This device is operated in packaging machinery.

The unit uses a tacho feedback specifically developed for this series of motors to recognize the position of the rotor. Its peak torque can be used over a wide speed range. This motor related power cables and encoder cables must be separated by a distance of at least 100 mm. The product is meant to be operated such that the permissible limits for the axial and radial forces are not exceeded. This device depicts a high resolution for its tacho feedback. The unit supports two types of feedback connectors. Its load factors must be multiplied when the ambient operating temperature and installation altitude are exceeded.This motor is not affected by a jet of water on its housing. The product can be installed vertically with the output shaft facing upward or downward. This device has no second shaft end or holding brake. The unit is not meant to be operated for residential applications. Its axes have a frequency range of 2 Hz to 9 Hz during sinusoidal oscillations. The AC servomotor can be painted with an extra layer of paint on the housing up to a limited thickness.