Product Description
The MAC112B-0-GD-4-C/130-A-0/WI518LV/S021 is a servo motor designed by Bosch Rexroth Indramat to improve automation systems by functioning as a reliable source of kinetic energy while maintaining energy efficiency. This servo motor is a rapid response device; it is built to be used in conjunction with the TDM, KDS, and DSC drive controllers, which are also produced by Bosch Rexroth Indramat. The housing design of this motor makes it able to completely withstand dust and water interference directed from any angle; it is also covered by a prime black coat, which can resist mildly corrosive liquids like dilute acids, seawater, and mineral oil. The MAC112B-0-GD-4-C/130-A-0/WI518LV/S021 motor does not generate an exceedingly high amount of heat when it is in operation; it does not require any elaborate temperature regulation system. Efficient heat dissipation is achieved in this servo motor through natural convection.
The MAC112B-0-GD-4-C/130-A-0/WI518LV/S021 industrial servo motor features a tacho feedback and a mounted encoder. The tacho feedback carries out accurate speed evaluation and rotor position recognition. Under ideal operating conditions, the rotor in this servo motor can reach a speed of 3000 revolutions per minute; even at this high speed, the motor still maintains an impressive accuracy. At a standstill, the motor requires a continuous current of about 41 amperes and a continuous torque of 16 newton meters.
The MAC112B-0-GD-4-C/130-A-0/WI518LV/S021 servo motor is not equipped with a blocking brake however this does not affect its operation safety. During operation, the ambient temperature around this industrial motor should be maintained between 0 to 45 degrees Celsius. It is also important to ensure that the motor is not installed at an elevation height that exceeds 1000 meters above sea level.