Product Description

The MAC112B-0-GD-1-B/130-A-1 is an industrial servo motor produced by Bosch Rexroth Indramat to operate with the TDM, KDS, or DSC drive controller and form a rapid response automatization system that can meet the kinetic energy requirements of a wide range of industrial applications. This servo motor is a permanent magnet excited device that maintains a low inertia during operation, the motor also features an electronic commutation that allows it to undergo a continuous start-stop operation at high repeat frequency. This industrial servo motor is very easy to use and install, it can be mounted in any orientation and it does not require installation into an additional control cabinet for protection.

The housing of the MAC112B-0-GD-1-B/130-A-1 servo motor is reinforced and it provides the motor with complete protection against both solid and liquid interference, the housing is also covered by a prime black coat that protects the motor from rapid deterioration that can be cause by corrosive liquid substances such as dilute acids, dilute alkali, sea water, mineral oil and lots more. The nominal speed of this industrial servo motor during operation is about 3000 revolutions per minute.

When the MAC112B-0-GD-1-B/130-A-1 industrial motor is at stand still, it operates at an input current of about 41 amperes it also generates a torque output of 16.0 newton meters. An electrically actuated holding brake is integrated into this servo motor, the holding brake retains the load connected to the output shaft of the servo motor when the motor is at a standstill. Also, the holding brake generates an holding torque of about 40 newton meters. The total weight of the MAC112B-0-GD-1-B/130-A-1 servo motor is about 36 kilograms.