Product Description

The high performance model MAC112A-0-LD-3-C/130-B-0 has a winding inductance of 1.9 mH and a winding resistance of 0.180 ohms. Black housing with a primer coating houses the motor. The housing's primary finish is resistant to diluted acids, yellowing, oxidation, and chalky deposits.

This MAC series AC servo motor is equipped with tacho feedback (second shaft end) and can be used in outdoor environments. The motor has a centering diameter of 130 mm and a torque constant of 0.350 Nm/A. The model includes a power connection on the B-labeled side of the housing, and for it to work effectively, the surrounding temperature must be between 0 and +45 degrees Celsius. Due to the permanent magnets used in its construction, the model possesses a moment of inertia of 61 x 10-4 kgm2. The AC servo motor can spin at a speed of 3000 revolutions per minute and generates a tremendous quantity of power. Due to the use of natural cooling, the MAC112A AC servo motor has a thermal time constant of 100 minutes. The maximum peak of pulse current value for the model is 130 A.

The model MAC112A-0-LD-3-C/130-B-0 is built by Bosch Indramat Rexroth as part of their MAC Series and weighs 25 kilos. The AC servo motor generates 9.8 Nm of continuous torque while using 31 A of continuous power at a standstill. The model must be transported and maintained at temperatures ranging from - 20 to + 70 degrees Celsius. The model has an IP65 certification for dust and water resistance and an F rating for insulation. The motor comes without a holding brake. This Indramat servo motor model (MAC112A-0-LD-3-C/130-B-0) is available for global shipping through Wake Industrial.