Product Description

The MAC093C-1-FS-4-C/110-A-2/WI524LV/S001 AC servomotor by Bosch Rexroth deploys axial surface cooling. The product uses a blower with 230 VAC voltage rating to support its cooling action. The device cannot be associated with an angle style feedback connector. This unit has an incremental encoder mounted on its housing. Its encoder is used for position detection and evaluation. The motor relies on square-wave pulses or sinusoidal signals for the functioning of the encoder. This product has an IP 44 protection rating. The device is meant to be mounted in machines with low shock loads. The unit should not be lifted or picked up by holding onto the blower as this can cause the blower to get ripped off or damaged. Its incremental encoder has a maximum scanning frequency depending on slave electronics when it works with sinusoidal signals. This motor portrays a standard tacho. The product has four electrical connections comprising the power connection, the tacho feedback connection, the incremental encoder connection and the blower connection. This device uses a protective motor switch for integrating the blower into the hardware circuitry. The servomotor has a holding torque of 14 Nm for its blocking brake. The unit can be used for applications with extreme loads such as for continuous start-stop operations with high repetitive frequency. Its blower cable must feature three cores with a diameter of at least 75 mm2 and should be connected only by an electrician or trained personnel. This motor supports voltage ratings of 5 V and 10 V to 16 V for an encoder working with square-wave pulses or 5 V for sinusoidal signals. The product has a lifespan of 30,000 operating hours for its bearings under normal conditions. This device related blocking brake tends to wear down after 20,000 motor revolutions.