MAC093C-0-FS-4-C/110-A-1/DI522LV/S004

Product Description

MAC AC servo motors by Indramat Rexroth are widely used in applications demanding precise control over linear or angular motion. The MAC093C-0-FS-4-C/110-A-1/DI522LV/S004 is a special type of MAC motor that comes with 3000 rpm speed, class F insulation, and International protection of IP 65. It is dust-tight and water-resistant. The rotor moment of inertia is 42 x 10-4 kgm2 for this motor whereas the torque constant is 0.579 Nm/A.

A holding brake is a critical component often integrated into AC servo motors, especially in applications where safety or precise positioning is paramount. The MAC093C-0-FS-4-C/110-A-1/DI522LV/S004 comes standard holding brake with a torque value of 6.5 Nm. The weight of the holding brake is 0.6 kg, and the weight of the total motor is 22.6 kg. the key applications of the holding brakes are vertical applications, safety-critical systems, precise positioning, and tension control. The release delay of the holding brake is 60 ms and the clamping delay is 20 ms. 

The centering diameter is 110 mm against flange type and B14 type mounting. The maximum peak of pulse current is 173 A. It is primarily determined by the servo drive and the motor's thermal capacity. When an AC servo motor is at a standstill, it still draws a certain amount of current, known as the standstill current. The continuous current at the standstill of the MAC093C-0-FS-4-C/110-A-1/DI522LV/S004 is 35 amperes and continuous torque at the standstill is 19.5 Nm/A. The tacho voltage of the machine is 9 V, and the cooling method is natural convection which means heat issues are catered without the aid of any mechanical devices. There are several factors that affect natural convection cooling. These factors include motor design, ambient temperature, motor orientation, and airflow.