Product Description
The MAC093B-1-GS-2-C/110-A-1/S005 model weighs 16.5 kg and features a primer-coated black for corrosion protection. In contrast, the thickness of the coat is less than 40 millimeters. The motor has a maximum speed of 4000 revolutions per minute and a maximum pulse current consumption of 192 A.
The MAC series AC servo motor has a thermal time constant of 45 minutes and uses surface cooling to dissipate heat. In order to get the highest possible degree of performance from the device, it is necessary to have the installation and operation of the model carried out by an experienced professional. The temperature range for the operation of the model is between 0 and + 45 degrees Celsius, and the power connection is located on the housing side labeled A. The degree of protection against dust and water offered by the MAC093B AC servo motor is rated at IP 65, and its insulation class is F. The model must be operated with the accessories mentioned by the manufacturer.
The model has a winding resistance of 0.136 ohms and a 110 mm centering diameter. The model MAC093B-1-GS-2-C/110-A-1/S005 is equipped for stationary operation with tacho feedback. Thermal switches are included in the motor's windings and stator housing. During surface cooling at a standstill, the servo motor can provide 20 Nm of constant torque while using 53 A of continuous current. The model type has a winding inductance of 2 mH and is part of the MAC Series of AC servo motors manufactured by Bosch Indramat Rexroth. The model comes with a standard holding brake having a nominal current of 0.7 and weighs 0.6 kg. The brake has a holding torque of 6.5 Nm and a clamping and release delay of 20 and 60 respectively.