Product Description

Rexroth Indramat produces a high-performance servo motor which represents as the MAC093B-0-OS-4-C/110-A-0/WI534LX. In an NC position control loop, the motor takes speed set points as input and runs at varied speeds. The key characteristics include the rapid acceleration in a short amount of time, the ability to reduce torque using the I (red) input and the ability to operate as a master or a slave to torque. You can order this control section from our website and is available for shipment worldwide via Wake Industrial's trusted network.

Some of the notable features the motor offers include: the ability to reverse the polarity of a set-point, input the set-point using either differential or summing signals and an externally adjustable drift offset. This servo motor can run at a nominal speed of 2000 min? and has a constant torque at a standstill of 14.5 Nm. Included in this drive system are parts such as the MAC servo motor, motor cable, servo drive module and mains input components.

With the motor part number, a variety of other features are indicated. The "093" indicates the motor size while the "MAC" indicates the motor for analog drives. For 2000 min nominal RPM, the winding model is specified by "OS". With an "A" for power connected to side A and a "0" for no obstructing brake, you can see that power is flowing. The "WI534LX" encoder code is associated with the conventional incremental encoder installation.