Product Description

The MAC093B-0-GS-4-C/110-A-3/W1520LV/S005 is state-of-the-art industrial synchronous motor produced by the reputable Bosch Rexroth Indramat in accordance to international quality standards. This industrial synchronous motor is a very durable device, that generates a high torque and can maintain a high operation accuracy over a broad speed range. The motor is intended to be used in combination with the KDS, TDM, or DSC drive controller series, the combination of the motor with any of this drive controller forms a rapid response automatization system that is well suited in machine tools, textile machines, food processing machines, robotic machines and lots more. The MAC093B-0-GS-4-C/110-A-3/W1520LV/S005 industrial motor is also permanent magnet excited device with electronic commutation. The electronic commutation allows the motor to undergo a continuous start-stop operation at a high repeat frequency. The permanent magnet of the motor is also from special materials which makes it possible for the motor to operate at a low inertial. The MAC093B-0-GS-4-C/110-A-3/W1520LV/S005 industral servo motor features a tacho feedback and second shaft end, it is also delivered with a very heavy duty holding brake that helps to retain the load connected to the motor output shaft when then motor is at a standstill. The connection between the motor and the drive controller occurs through a power and motor feedback cables. The connecting cables are not delivered with the motor as a standard, operators are expected to make separate request for these accessories. The permissible ambient temperature for the operation of the MAC093B-0-GS-4-C/110-A-3/W1520LV/S005 industrial motor falls between 0 to about 40 degree Celsius. Also, to ensure rated operation, the motor should not be used at an height that exceeds 1000 meters above sea level. The total weight of this industrial motor is about 16.5 kilograms.