Product Description

The MAC093B-0-JS-2-C/110-A-1 servo motor is a compact motor designed for automation systems in both commercial and industrial applications. This servo motor is produced to maintain the highest standards of operation efficiency and quality, it is built to last, and it can be directly used within the working areas of industrial machines without any reduction in operation efficiency. A tacho feedback is integrated into the housing of this servo motor, this feedback allows the controller to track the motor?s operation, and control these operations according to pre-determined configuration parameters. The high overload capacity of this industrial servo motor is majorly due to the electronic commutation of the motor, this commutation helps the motor to undergo continuous start stop operation whist still maintain high operation efficiency.

The MAC093B-0-JS-2-C/110-A-1 industrial servo motor does not produce an extremely high amount of heat during operation, however the moderate heat produced in the motor housing is transmitted to the motor shaft where it is dissipated by natural convection. The nominal speed of this motor during operation is about 3000 revolutions per minute. When the motor is at a standstill, it produced a continuous torque of 14.5 newton meters, and generates a continuous input current of 27 amperes. The winding resistance of the motor is 0.227 ohms, while the motor winding inductance is 4.0 millihenry.

The MAC093B-0-JS-2-C/110-A-1 servo motor is designed to be used at an ambient temperature that is between 0 and 45 degrees celsius, also the peak permissible installation height for the motor is about 1000 meters above sea level. A standard holding brake is integrated with the motor to retain any load on the motor shaft when the motor is at a standstill.