Product Description

MAC093B-0-GS-2-C/110-B-0 is a servo motor. It is produced by Bosch Rexroth. The motor is part of the MAC motor series. It must be deployed in combination with a compatible servo controller. MAC motors support tacho feedback. This feedback technology provides speed and position evaluation. MAC motors are made with permanent magnets. These maintenance-free motors use life-time lubricated bearings and are available in IP65 rated housings. These motor housings provide full dust ingress protection and protection from low-pressure water jets. MAC motor housings are protected by a prime coat. This coat provides corrosion protection and protects against other chemicals such as lyes. A 40 micrometer paint layer can be applied on top of the black prime coat. Both cable connections on the MAC motors have separate flanged sockets. These also comply with IP65 requirements.

MAC093B-0-GS-2-C/110-B-0 is a servo motor with 4000 RPM nominal speed rating. It supports convection cooling and requires 0 to 45 degrees Celsius temperature for rated output. The permitted temperature for derated output is 45 to 55 degrees Celsius. The optimal site elevation for rated output is 0 to 1000 meters. The permitted elevation for derated output is 1000 to 5000 meters above mean sea level. Centering diameter of the servo motor is 110 millimeters. Additional mechanical specifications include 140 millimeter flange size, 24 millimeters shaft diameter and 316 millimeters motor housing length. The length of the shaft available outside the motor housing is approximately 50 millimeters. At least 100 millimeters of spacing is recommended between the routed power and feedback cables. This spacing is required to prevent electromagnetic interference from affecting the feedback signals and causing errors in the transmission.