Product Description

MAC093A-0-PS-2-C/110-B-B/5005 is a Bosch Rexroth servo motor. It is part of the MAC series of industrial motors. These motors are ideal for applications that include robotics, machine tools, textiles, transfer facilities, and printing presses. Permanent magnets are used for MAC motor construction. These motors use electronic commutation for switching the current to maintain continuous rotation. This commutation technology eliminates the need for mechanical brushes and commutators, resulting in higher efficiency, reduced wear, lower maintenance, and better performance. This feature, combined with life-time lubricated bearings and IP65 rated housings and cable connections, enables maintenance-free operation for AC motors. MAC motors have two separate feedback and power connections on the housing. A black prime coat applied to the housing provides protection from corrosive elements. If required, operators can apply a 40-millimeter paint layer on top of the prime coat.

MAC093A-0-PS-2-C/110-B-B/5005 is a motor with a shaft that includes a keyway. This shaft complies with DIN 6885-1, which is a German quality standard. Diameter of the motor shaft is 24 millimeters. Speed rating of the MAC093A-0-PS-2-C/110-B-B/5005 motor is 3000 RPM. With convection cooling, it delivers 9.2 Nm continuous torque at standstill and 15 Amps continuous current at standstill. If required, operators can order surface-cooled MAC motors with an axial or radial cooling fan. Surface cooling enables higher torque and current output, and is therefore suitable for higher application load requirements. A blocking brake is installed on the motor. This a safety feature designed to prevent accidental shaft rotation. The brake releases the shaft after receiving a 24 Volts DC electrical release signal from the motor controller. MAC motors are compatible with TDM, KDS and DSC series controllers from Bosch.