Product Description

High-performance servo motor MAC092B-0-QD-4-C/095-A-0/WA608XX/S001 for precise control in industrial applications. It provides an baseline torque of 7.2 Nm at stationary, with a peak torque of 10.5 Nm. Its nominal engine speed is 2000 min-1. At stationary, the motor runs constantly at 11.9 Amperes, with an optimal current rating of 17.4 Amperes. It has a constant torque of 0.67 Newton-meter/Amperes at 20 degrees, winding resistance value of 0.97 Ohm, & winding inductance value of 5.1 mH.

With a duty factor, the torque demonstrated under "ED" may be used for stall operation (operation mode S6 DIN 57530/VDE 0530). The motor documents specifies the maximum duration, which varies based on the motor size. Step commands without moment of inertia or load torque may be used to accomplish the servo motor's acceleration time to nmax or deceleration time from nmax to zero RPM in smaller, short-duration torque applications.

The power data of the drive-motor combination in supply modules with an unregulated power supply are subject to variations in mains voltage. At the mains, varying power data may be obtained with nominal voltage, 10% undervoltage, and 10% overvoltage. To guarantee dependable and constant motor functioning, these circumstances should be taken into account throughout operation since they have an impact on overall performance. The MAC092B-0-QD-4-C/095-A-0/WA608XX/S001 servo motor will function precisely and efficiently in a variety of industrial applications provided certain requirements and operating conditions are met.