Product Description
MAC090C-1-GD-4-C/110-A-2/WA610XX/S013 is a digital AC motor. It is developed by Bosch Rexroth. The motor forms part of a servo system in combination with a servo controller. MAC motors from Bosch are made with permanent magnets that enable construction of motors with low inertia. These motors support electronic commutation. The motor bearings are lubricated for the motor’s complete operating lifespan. The IP65 rated motor housing provides complete protection against dust ingress and strong protection against water ingress. As a result, MAC motors perform with high reliability and do not require maintenance. Therefore, the operational expense related to these motor is minimal. However, failure to comply with recommended installation practices or using the motors under sub-optimal conditions can lead to equipment damage or failure. The ideal ambient temperature for MAC motor operation is 0 to 45 degrees Celsius.
MAC motors can be used outside this temperature range, but with output derating. Furthermore, prolonged use of the motors under sub-optimal operating conditions can lead to motor component failure. Moreover, Bosch does not accept liability for damage or injury caused by improper motor use. The MAC090C-1-GD-4-C/110-A-2/WA610XX/S013 is a feature-rich MAC motor. It supports tacho feedback and encoder feedback, and is equipped with a cooling fan and a blocking brake. Bosch provides radial and axial fans for MAC motors. The cooling fan on the MAC090C-1-GD-4-C/110-A-2/WA610XX/S013 moor is an axial cooling fan that operates at 230 Volts AC. Bosch provides a standard and a heavy-duty blocking brake for MAC090C motors. The brake installed on the MAC090C-1-GD-4-C/110-A-2/WA610XX/S013 is a heavy-duty blocking brake rated for 14 Nm holding torque. Nominal speed rating of the motor is 3000 RPM and its centering diameter is 110 millimeters.
Wake Industrial Warranty
