Product Description

The Bosch Rexroth MAC090C-1-GD-4-C/110-A-1/WI525LV has a plain and output shaft. This servomotor has a floating bearing on side A where the output shaft is located. The product has a tacho voltage that is set to match the motor speed. This device uses a straight connector for feedback. The unit has an axial blower fitted onto its housing for surface cooling. Its electrical connections include the power connection, the tacho feedback connection, the incremental encoder connection and the blower connection. This motor comes with spigot nuts on its connectors. The product has a hot surface during and immediately after operation. This device encompasses thermo switches that monitor its temperature and prevent overload damage. The unit is designed to be used only in industrial machinery. It has a brushless design. This motor should be handled only by experienced and trained personnel. The product is meant to be operated only for standard applications. This device-associated encoder is highly resistant to environmental conditions. The unit has a maximum speed based on the DC bus voltage with a regulated or unregulated power supply. This servomotor portrays a duty cycle time of up to 15 minutes with intermittent operations. Its rotor has a moment of inertia of 53 x 10^-4 with the tacho generator and without the holding brake. The product has a nominal voltage rating of 24 VDC +/-10% for the holding brake. This device storage and transportation must be done in the horizontal position. The unit has a standard pilot diameter of 110 mm for the mounting flange. It is always equipped with a shaft sealing. This motor features a permissible radial force based on the point of application of force and the average speed.