Product Description

The MAC090C-0-KD-4-C/130-B-1/WI511LV/S011 AC servomotor from Bosch Rexroth encompasses permanent magnets in its rotor. This servomotor feedback is realized through an incremental encoder apart from the standard tacho feedback. The product-associated speed evaluation per tacho generator is achieved by its tacho feedback. This device comes with bearings that are lubricated for their entire lifetime. The unit has a favorable torque-to-inertia ratio. Its blocking brake helps in achieving a safe standstill of the axis even when the power is turned off. This motor has a plain output shaft for non-positive shaft-hub connections. The product uses connectors fitted on flanged sockets for the direct connection of its power, tacho feedback as well as encoder cables. This device has reduced output if the operating conditions are outside the specified ambient range. The unit is protected against the penetration of water by means of its housing and covers. Its lateral axis portrays a maximum excursion amplitude of 0.7 mm with sinusoidal oscillations. This motor relies on a standard mounting style for its encoder. The product is associated with a customized pilot diameter of 130 mm for the mounting flange. This device always has a shaft sealing to prevent the penetration of liquids into its housing along the shaft. The unit related axial shaft load is calculated with the help of a formula. Its output shaft is attached to the rotor on side A. This servomotor encounters a magnetic force on the brake armature disc at zero current. The product cannot be used without a grind-in if it has been stored for an extensive period of time. This device is designed such that the output direction of the power connector faces side B.