Product Description

MAC090C-0-KD-4-C/110-B-1/WI517LV/S001 is a Bosch Rexroth AC servo motor. It is designed for industrial use. With purpose-built tacho feedback technology, the motor forms part of effective closed loop control systems suited to demanding industrial applications. Applications of the motor include robotics, machine tools, printing presses and textiles. The motor comes with an attached rating plate. Information listed on this plate enables motor identification. Operators and staff must verify information listed on the rating plate at the time of equipment delivery. The motor works in combination with a compatible motor controller. Compatible motor controllers include those from Bosch?s TDM, KDS, and DSC product lines. The controllers perform two primary functions: they supply power for the motor and they control motor speed and torque. Separate power and feedback cables connect each MAC motor to the associated motor controller.

To prevent interference between the cables, Bosch recommends minimum spacing of 100 millimeters. The shield of the encoder cable should be applied to the NC in the encoder connector. None of the cables should be pulled out nor inserted into the connector while voltage is being applied. The MAC090C-0-KD-4-C/110-B-1/WI517LV/S001 is a motor with a 2000 RPM nominal speed rating. Its continuous torque output at standstill is 10.4 Nm and the continuous current output at standstill is 17 Amps. The motor comes with an optional blocking brake. This brake is a safety device designed to prevent accidental motor movement. Its holding torque rating is 6.5 Nm. Voltage rating of the brake is 24 volts DC and its current draw is 0.7 Amps. The MAC090C-0-KD-4-C/110-B-1/WI517LV/S001 motors is designed for convection cooling. Bosch recommends 0 to 45 degrees Celsius for rated operation.