Product Description

MAC090C-0-KD-2-C/110-A-0/S001 is a Bosch Rexroth servo motor. It requires AC input power. The input power is supplied by a motor controller. In addition to supplying electrical power, the controller receives real-time feedback from the motor and controls motor speed and position. MAC motors support tacho feedback. The feedback is transmitted to the controller via a dedicated feedback cable. The feedback connection on the motor is IP65 rated. A separate power cable carries power from the controller to the motor. The power connection location can be selected at the time of ordering. The power connection on the motor is IP65 rated. To prevent interference from causing errors on the feedback cable, at least 100 millimeters of separation must be provided between the power and feedback cables.

All motor cables must only be connected or disconnected when the motor is not under power. The MAC090C-0-KD-2-C/110-A-0/S001 is a motor with 110 millimeters centering diameter. Its weight is 23 kilograms. The motor housing has a 140 millimeter flange at one end with four mounting holes. The diameter of the mounting holes is 11 millimeters. Length of the AC servo motor is 407 millimeters. Performance specifications for the MAC090C-0-KD-2-C/110-A-0/S001 motor include 2000 RPM nominal speed rating, 10.4 Nm continuous output torque, and 17 Amps continuous output current at standstill. The housing is fully sealed against dust ingress and complies with IP65 requirements. The housing is also fully protected from water directed at it from low-pressure jets. If required, operators can order the motor shaft with a seal for added ingress protection. Operators can also order optional blocking brakes for added safety during operation. The working temperature is 0 to 45 degrees Celsius.