Product Description

The MAC090C-0-KD-1-B/110-A-2/101000/S013 is a reliable and highly efficient servo motor built by Bosch Rexroth Indramat to improve industrial and commercial operation processes by serving as a reliable and cost-efficient source of kinetic energy in the servo system. The servo motor is intended to be used in association with the DSC, TDM, and KDS Rexroth drive controller to form a quick response and accurate control system that is perfectly suited to be used in a broad range of industrial applications such as printing presses, machine tools, textile machines, heavy handing equipment and robotics. Unlike traditional motor design, this servo motor is a maintenance free device that can operate in poor environmental conditions without any significant reduction in operation efficiency.

The MAC090C-0-KD-1-B/110-A-2/101000/S013 motor is a permanent magnet excited device, the magnets are rare permanent magnets that helps the servo motor to maintain a continuous start-stop operation at a high repeat frequency. The MAC090C-0-KD-1-B/110-A-2/101000/S013 is specially designed to have a comparatively low weight, this makes the transportation, installation, and general handling of the servo motor a very easy and efficient process.

The normal speed of the MAC090C-0-KD-1-B/110-A-2/101000/S013 servo motor during operation is 2000 revolutions per minute, at this operation speed, the motor still maintain its high accuracy. When the servo motor is at a standstill, it operates with an input current of 17.0 amperes, and can produce a torque output of 10.4 newton meters. At a motor surface temperature of 20 degree celsius, the torque constant and winding resistance of the motor is 0.68 newton meters per ampere and 0.60 ohms respectively . The motor is delivered with an heavy duty holding brake that helps to retain load connected to its output shaft at standstill.