Product Description
The MAC090C-0-KD-1-B/110-A-0/-I00625 Bosch Rexroth AC servomotor and its drive controller form an integral part of the manufacturer’s drive system. This motor has a maximum duty cycle time of 15 minutes. The product is meant to be put to use at an operating temperature ranging from 0°C to 45°C. This device has to be protected against damage during commissioning and mounting. The unit encompasses bearings with a lifespan of 30,000 operating hours as per ISO 281 specifications. Its operating curves portray the permissible continuous torque with the S1 operating mode. This motor houses permanent magnets in its rotor. The product is delivered without a blocking brake.
This device portrays an IP 65 degree of protection. The unit can be mounted according to Design B5 by using a mounting flange with throughholes. Its keyway shaft complies with DIN 6885, Sheet 1 specifications. This motor shaft features the application of a load as soon as it is affected by axial or radial forces. The product experiences a shift of the motor shaft end by 0.6mm with respect to the housing when thermal deformations are encountered. This device has thermo switches connected in series in its windings. It is not possible to change the output direction of the power connector. The servomotor has a year’s Wake Industrial warranty.
This motor-associated feedback helps in evaluating its speed. The unit handling and operation must be done by only qualified personnel. It has a very hot surface during operation. This product is associated with a mass of 23kg with its tacho generator and without a blocking brake and blower. The device’s torque-speed characteristics help to assess the maximum possible usable speed for a special application with known torque requirements. Its drive-motor combination power data is not dependent on the mains voltage fluctuation if the supply module has a regulated power supply. This MAC090C-0-KD-1-B/110-A-0/-I00625 servomotor shipment is possible across the globe.
Wake Industrial Warranty
