Product Description

Bosch Rexroth Indramat is an engineering company that is dedicated to the solving industrial automation problems through the design and production of effectively and sophisticated machines. The company has a production experience that exceeds 30 years, and has designed hundreds of machines that are widely used in various industrial and commercial applications all over the world. The MAC090C-0-GD-4-C/110-A-1/WI578LV/S01 industrial servo motor is a permanent magnet excited device with magnets that are made from rare materials. The magnets present in the motor allows it to maintain low inertial during operation, it also helps the motor to generate less heat and friction during operation. The motor also has an electronic commutation, it can undergo continuous start-stop operation at a high repeat frequency without any significant reduction in efficiency.

The << MAC090C-0-GD-4-C/110-A-1/WI578LV/S01 servo motor communicates with the drive controller through a motor feedback cable, it also operates with a power cable the supplies with it electrical energy. All cables required by the motor for operation enter the motor housing through electrical connectors designed to meet the IP65 protection of the motor housing. During operation, the nominal speed of this motor is about 2000 revolutions per minute. The motor has a unique stator and high cyclic load capacity, this provides the motor with excellent running qualities.

The ambient temperature suited for the operation of the MAC090C-0-GD-4-C/110-A-1/WI578LV/S01 servo motor is between 0 to 45 degree, at this temperature range, the motor maintains its rated data and accurate operation. Although the motor can be mounted in any orientation, it should not be installed at an height that exceeds 1000 meters above sea level. Only Bosch Rexroth cables should be used with the motor, and they should be ordered separately.