Product Description

The MAC090C-0-GD-4-C/110-A-1/DI522LV is one of the extensively used AC servo motor in industrial settings. The motor refers to the MAC series of Rexroth Indramat and is designed for low-to-medium torque requirement applications.

This MAC permanent magnet motor is designed to deliver high power to weight ratio. The motor generates 9.6 Nm of torque while drawing 24.8 A of current from the system. The rated speed of the MAC servo motor is 3000 rpm. The speed and position of the rotor can be detected by standard tachofeedback and incremental encoder with shock-damped mounting. The encoder processes the square-wave signals and operates on 5V input power. The motor operates on 3-phase AC input voltage, supplied by the attached drive controller. A-side power connector is placed at the top of the motor to make electrical connections using Indramat specified cables. To hold the shaft at standstill, a standard 6.5 Nm holding brake is provided in this model that operates in 24VDC voltage. The centering diameter of the motor?s shaft is 110 mm. The IP65 protection category of MAC090C AC servo motor provides protection against dust particles and low-pressure waterjets. The motor enclosure is also painted with prime black color to provide resistance against chalking, weathering, and yellowing.

The MAC090C-0-GD-4-C/110-A-1/DI522LV AC servo motor is cable to utilize the peak torque over a wide speed range. The motor offers easy mounting to the machine due to its B05 and B14 flange design. The maximum allowed installation elevation for this MAC090C permanent magnet motor is 1000 meters above sea level. The ambient temperature should also range between 0 to +45 degree Celsius. Wake Industrial offer this MAC090C-0-GD-4-C/110-A-1/DI522LV AC servo motor to its customers along with a one-year warranty.