Product Description

The MAC090C0-GD-3-C/110-A-1/S001 is an highly durable and cost-effective servo motor built by Bosch Rexroth Indramat according to international quality and safety standards. The motor has a compact design, and can generate a relatively high torque during operation. The motor belongs to the IP65 protection class, it is also a permanent magnet excited device that operates at a low inertial and can undergo accurate and continuous start-stop operation at a high repeat frequency. The feedback of this servo motor includes a high resolution tacho feedback and a second shaft end, this feedback system operates at high resolution and is responsible for the smooth operation of the motor. The MAC090C-0-GD-3-C/110-A-1/S001 servo motor requires two main types of connection cables; the power cable and the motor feedback cables. These connection cables are already ready made by Bosch Rexroth, and should be ordered separately.

The MAC090C-0-GD-3-C/110-A-1/S001 industrial servo motor manages operation temperature via natural convection, the heat generated in the motor stator and winding is efficiently transmitted to the housing where it is easily dissipated. A standard electrically-actuated released holding brake is present in this servo motor, this holding brake helps to retain load connected to the motor when it is at a standstill. The brake generates an holding torque of 6.5 newton meters an has a total weight of 0.5 kilograms.

The MAC090C-0-GD-3-C/110-A-1/S001 industrial servo motor operates at a rated speed of 3000 revolutions per minute, at this speed the winding inductance is about 1.5 millihenry, while the maximum peak of pulse current is about 196 amperes. The motor has a centering diameter of about 157 millimeters, and a length of about 485 millimeters. The total weight of the motor is 23 kilograms.