Product Description
The MAC090C-0-EG-4-F/130-B-0/WI511LV/S035 AC servomotor has a C length code. The Bosch Rexroth motor is associated with a customized pilot diameter of 130mm for the related mounting flange. This product comes with the ability to perform under poor environmental conditions and is not affected by soluble oil emulsions and coolants. The device is safeguarded against overload damage by the integrated thermos switches that monitor its temperature. The unit uses power, tacho feedback and encoder cables that are designed such that they meet IP 65 demands. Its Side B helps to absorb the axial forces. The motor shaft is held in place at a standstill.
This product portrays a special windings design. The device has a simple installation process because of the readymade cables available for this purpose. This unit renders high dynamic performance. It features a favorable torque-to-inertia ratio. The motor tacho voltage matches the nominal motor speed of 3000min-1. This product is cooled by natural convection. The device installation altitude must at no time exceed 5000m above sea level. This unit has tolerance class N and position accuracy and concentricity with respect to the shaft as per DIN 42955 specifications. Its load factors must be multiplied if both the ambient temperature, as well as installation elevation, is exceeded. The MAC090C-0-EG-4-F/130-B-0/WI511LV/S035 servomotor features a warranty valid for a one-year duration.
This product has maximum 5Nm tightening torque for screws in the threads of its center spigot. The device uses an INS 108 connector for its power connection. This unit mounting onto the machine is to be done by only fully trained personnel. It is necessary to do a reference point setting check when a motor replacement is done. The motor-associated protective covers are to be removed only immediately before the mounting action is done. This product has to be in a dry state when it is being transported. The servomotor is shipped to the destination in rugged packing.