Product Description

The MAC090B-1-PD-1-B/110-A-0/J625/S0 is an AC servo motor designed by Rexroth Indramat to perform various industrial automation tasks. This motor should be used together with the drive modules specified by the manufacturer.

The MAC090B AC servo motor is capable to operate at the rated speed of 2000 rpm and has 1.9 mH of winding inductance. This Indramat AC servo motor offers high power output by delivering 10.5 Nm of continuous torque at standstill position. The continuous current required by this model is 17.4 A. This MAC servo motor features an axial blower unit to maintain its ambient temperature. It blower requires 230 V AC input voltage and consumes 40/42 VA of power. The B05 and B14 flange design of the motor allows installation in any orientation. The motor comes with an A-side power connector and uses INK 250/INK 650 power cable to make electrical connections. The minimum required cross-section for the electrical cable is 1.5 mm2. The model is not equipped with any holding brake but several temperature monitoring sensors are provided to avoid overload protection. A tachofeedback is provided in this model to detect the position and velocity of the shaft. The motor housing is protected against IP65 protection classification and class-F insulation.

The model MAC090B-1-PD-1-B/110-A-0/J625/S0 weighs only 18 kg and has a thermal time constant of 45 mins. At 20 degree Celsius, the torque constant and winding resistance of the motor are 0.67 Nm/A and 0.97 Ohm. A life-time lubricated durable bearing is installed in this MAC090B servo motor for maintenance-free operations. The allowable temperature range for this model is 0 to +45 degree Celsius and it can be installed at the maximum height of 1000 MSL. This motor is available for order at Wake Industrial.