Product Description
MAC090B-0-PD-4-C/130-B-1/WI533LX/S012 is a Bosch servo motor with a plain shaft. The motor shaft is equipped with a shaft seal. This seal prevents ingress of contaminants such as dust and moisture. The seal also prevents leakage of motor oil. Despite the seal, Bosch recommends protecting the motor shaft from liquids for instances where the motor is installed with the shaft pointing vertically in the upwards direction. The motor housing is fully sealed and complies with IP65 requirements. This protection rating signifies that the motor housing does not permit dust ingress. In addition, the motor housing is fully protected against water directed at the motor from low-pressure jets. Speed rating of the motor is 2000 RPM. Its rated output torque is 7.2 Nm and its rated output current is 11.9 Amps. The torque constant is 0.67 Nm/A at 20 degrees Celsius.
Resistance of the motor windings is 0.97 Ohms at 20 degrees Celsius. Inductance of the motor windings is 5.1 millihenry. Thermal time constant of the MAC090B-0-PD-4-C/130-B-1/WI533LX/S012 motor is 60 minutes. Its mass is 18 kilograms. Mass of the optional blocking brake installed on the motor is 0.5 kilograms. Therefore the total mass of the package is 18.5 kilograms. The brake on the motor is a standard blocking brake rated for 6.5 Nm holding torque. Additional motor features include a standard tacho generator and power plug on side B of the housing. Connectors for the power and feedback cables are not supplied with the motor, and must be ordered separately. The ideal ambient temperature range is 0 to 45 degrees Celsius. Use of the motor outside this range is not recommended, as it leads to derated output, and can also lead to component malfunction.
Wake Industrial Warranty
