Product Description

MAC090B-0-PD-3-C/110-B-0/S001 is a 2000 RPM MAC series servo motor. It is manufactured by Bosch Rexroth. The permanent magnets used in motor construction allow production of low-inertia motors. MAC series motors support tacho feedback designed especially for the product line. Tacho feedback on the motors provides speed and position evaluation. Voltage constant of the tacho generator is 3 Volts per 1000 RPM. If required, MAC motors can be equipped with a separate encoder for position evaluation. MAC motors have an IP65 rated housing. These housings are fully dustproof. These housing are also safe from water or liquids directed at the motor from low-pressure water jets. Torque output of the motor under ideal operating conditions is 7.2 Nm. Current output of the motor under ideal operating conditions is 11.9 Amps. Resistance of the motor windings is 0.97 Ohms at 20 degrees Celsius. Inductance of the motor windings is 5.1 millihenry. A controller connected to the motor supplies electrical power. The power reaches the motor via a dedicated power cable. This cable connects to the power connection on the motor housing. Operators can specified the power connection location to match application requirements. The power connection on the MAC090B-0-PD-3-C/110-B-0/S001 motor is on side B. The motor is without an optional holding brake. Its centering diameter is 110 millimeters and its length is 342 millimeters. The motor cools via convection cooling. Surface cooling is available as an option for MAC motors. The motor is packed onto a palette or carton at time of delivery. Single motors packed on a palette or carton are secured against sliding by means of squared timbers, and are lashed into place with tight metal bands.