Product Description
The MAC090B-0-PD-3-C/110-A-0/S01 AC servomotor from Bosch Rexroth has a phase current rating of 9.7 A. This motor houses a second shaft end on side B. The product has a laminated core in its rotor with permanent magnets embedded in it. This device has a standard tacho. The unit is not affected by a jet of water sprayed from a nozzle in all directions. It can be put to use under weatherproofed conditions in a stationary mode according to IEC 721-3-3 or EN 60721-3-3 specifications. This motor uses a 12-pin flanged socket for the feedback connection. The product has no encoder or blocking brake connection.
This device encompasses thermo switches in its windings and stator housing. The unit related drive controller has standardized electrical connections. It is not possible to opt for a change in the output direction of its power connector. This motor does not need complete sealing for its second shaft end because of its IP 65 protection rating. The product incorporates the second shaft end as an expansion of its tacho feedback. This device should not be cleaned using harsh cleansing agents. The unit has to be in a dry state during its transport and storage.
These servomotor-related operating curves depict its torque and speed limiting data. It has a duty cycle time of up to 15 minutes with intermittent operations. The product has a continuous current rating of 11.9 A when it is in standstill mode. This device has an overall length of 342 mm. The unit associated permissible axial force is calculated using a formula. Its bearings are designed to support a lifespan of 30,000 operating hours when the motor is used as intended.