Product Description

Featuring a theoretical motor speed of 3000 min-1, the sturdy servo motor MAC090B-0-ND-4-C/130-B-1/WA605XX is designed for harsh industrial uses. Under certain conditions it can reach 10.5 Nm from an ongoing torque on standstill of 6.7 Nm. The motor runs steadily with 13.0 A, maybe up to 20.0 A. At 20?C its rotor moment of inertia equals 36 x 10-4 kgm2 & its torque constant equals 0.58 Nm/A. The inductance & winding resistance respectively are 3.9 mH & 0.75 Ohm. This motor guarantees reliability with an ultimate pulse current of 98 Amperes & a thermal time interval of 60 (45) minutes. The motor weights eighteen kg.

Mounting flanges with certain pilot sizes are offered upon demand to ensure compatibility with numerous systems. This function helps to connect motors that come from various manufacturers. Among the many choices available to improve the reliability of the motor, INDRAMAT advises on utilizing basic output shafts. Furthermore, certain motor shifts may include surface-cooling devices to control continuous start-stop operations at high frequency. Blower motors running either AC 230 V or AC 115 V can be purchased for these demanding uses, therefore promising the motor stays cool as it runs well under load.

Following specified procedures is crucial for optimal efficiency, especially in challenging industrial surroundings. Should the engine have been kept for a period of time exceeding two years, it needs to be ground before usage. Running the motor at around 100 rpm, eliminating the holding brake for roughly 60 seconds, and then reconnecting it to its hardware circuitry or PLC results a reboot. Following these guidelines ensures the reliability & longevity of the servo motor, so it is an excellent choice for many kinds of industrial use.