Product Description
This servo motor, model MAC090B-0-ND-4-C/110-A-1/WA612XX/S001, operates at a nominal speed of 3000 min-1. It is capable of providing a continuous torque of 6.7 Nm when at standstill, with the capacity to reach a maximum at 10.5 Nm. It needs an average flow of 13.0 A when not in action, reaching an upper limit of 20.0 A. With a rotor moment of inertia of 36 x 10^-4 kgm, the motor supplies a torque constant of 0.58 Nm/A during 20C. The resistance of the windings is 0.75 Ohm, while the inductance evaluates 3.9 mH. The motor has a maximum peak pulse current of 98 Amperes, a thermal constant time of sixty minutes (or 45 minutes under specific conditions), and an overall weight of 18 kg.
For effortless integration with motors of various manufacturers, INDRAMAT provides mounting flanges supplied with specified pilot diameters upon contact. It is recommended to choose simple output shafts from the variety of available options for output shafts. Some motor variants may be fitted with surface-cooling units to handle demanding tasks, such as high-frequency, ongoing start-stop operations. Blower motors are available for this purpose, operating on either 230 V AC or 115 V AC. Thoroughly setting up the motor is crucial if it has been stored for a period of time exceeding two years. This requires operating the motor at roughly 100 rpm while releasing the holding brake for about 60 seconds before reconnecting it to the hardware wiring or PLC.
Following these procedures ensures the long-lasting and reliable operation of the MAC090B-0-ND-4-C/110-A-1/WA612XX/S001 servo motor, especially in challenging working environments. Ensuring proper grounding as well as preparation is crucial to protect the motor's performance as well as ensure its long lifespan. Following these steps is crucial for ensuring the motor operates at its best while preventing any problems that may arise from prolonged periods of storage or demanding usage.
Wake Industrial Warranty
