Product Description

At resting state, the industrial motor MAC090B-0-JD-4-C/130-A-1/WI549LX/S003 generates 6.7 Nm of torque, climbing to 10.5 Nm at peak scenarios. Its nominal pace is 3000 min-1. When idle, it provides an ongoing current of 18.2 A, emerging to 28.5 A in peak conditions. The motor's resistance to shifts in rotational speed can be measured by the rotor moment of inertia, which is equal to 36 x 10^-4 kgm. The windings' resistance is 0.38 Ohm and their capacitance is 2.0 mH at 20 ?C, while the torque steady is 0.41 Nm/A. With a highest pulse current capacity of 137 Amperes, this motor delivers dependable performance even in the most demanding of situations.

The motor's performance, is dependent on certain outside conditions. Installation heights up to 1000 meters above sea level and climates between 0 and +45 ?C are ideal for its most effective operation. As shown in the user manual's supplementary representations, if these requirements fail to be fulfilled, the output performance will be lowered. To modify the performance for elevated ambient temperatures and altitudes transpiring at the same time, load factors fT & fH must be employed. In order to ensure the motor's durability and dependability in different weather circumstances, these factors are extremely important.

The motor is designed to comply with the specifications of DIN 40 050, which promise that it is protected against water intrusion, puncture by external objects, as well as contact with moving or live elements. This is shown by the IP65 protection category, where the first number '6' indicates total protection against dust & contact, and the second digit '5' indicates coverage against water jets from any possible direction. Because of its robust build, the motor may handle a wide range of industrial settings with no effect on performance or safety.