Product Description
The MAC090B-0-JD-4-C/110-B-1/WA605XX is a type of MAC motors that achieve a high degree of reliability because it offers maintenance-free operation. It has a brushless design and uses lifetime lubricated bearings. This machine is effective to use directly even under poor environmental conditions such as the effects of coolants, soluble oil emulsions, etc. To cater the problem of overload, the temperature is closely monitored with thermo switches integrated into the motor windings and stator housing. The power is extracted from the connector side B and the power connection minimum cross-section area is 1.5 mm2.
The weight of the MAC090B-0-JD-4-C/110-B-1/WA605XX with tacho-generator, without holding brake, without blower is 18 kg. The blocking brake is standard, and it corresponds to the value of 6.5 Nm. The mass of the holding brake is 0.5 kg which leads to the total weight of the machine to 18.5 kg. The clamping delay is 0.2 seconds and the release delay is 0.6 seconds. The maximum peak of the pulse current is 137 A. The continuous torque at standstill, continuous current at standstill, and torque constant of this AC servo motor variant are 6.7 Nm, 18.2 A, and 0.41 Nm/A. The winding resistance and inductance of MAC servo motor of this type are 0.38 ohms and 0.002 H respectively.
The motor feedback of a MAC AC servo motor is always made up of one tacho feedback. For position evaluation on the motor, the motor can also be equipped with a variety of encoders. The MAC090B-0-JD-4-C/110-B-1/WA605XX comes with standard tacho feedback and mounted incremental. For speed evaluation per tacho-generator and rotor position recognition, the motors are equipped with tacho feedback especially developed for this series. The winding type is JD, and the length of the motor is 392 mm.
Wake Industrial Warranty
