Product Description
The MAC090B-0-JD-4-C/110-B-0/WI534LX/S001 is a type of AC servo motor. MAC AC servo motors are permanent magnet-excited motors with electronic commutation. The permanent magnets of the rotor are made up of materials that make it possible to construct motors with very low inertia. MAC represents the motor for analog drives, whereas this variant motor length and size are B and 90 respectively. To cater to the heating issues, this variant of servo motor uses convection method cooling. It is advised to install the motor up to a height of 1000 meters above sea level and the temperature range must be within 0 to 45 C. If the conditions deviate from the values, then the output data will decrease.
The rated speed of the MAC090B-0-JD-4-C/110-B-0/WI534LX/S001 is 3000 rpm. The output data of the motor is high, and the power is extracted from the connector side B. The motor phase current is 14.8A and the power connection minimum cross-section area is 1.5 mm2. The motor power connector of 090B-0-J crimping and soldering type are INS 108/02, and 108/06 respectively. The motor feedback comes with standard tacho feedback and mounted incremental. Mounting of the MAC motors to the machine is simple, and this variant consists of standard mounting. The weight of the motor is 18 kg, whereas the continuous torque and torque constant of this AC servo motor variant is 6.7 Nm and 0.41 Nm/A. The maximum peak of pulse current is 137 amperes.
The centering diameter of the MAC090B-0-JD-4-C/110-B-0/WI534LX/S001 is for designs B05 and B14. The MAC motors are protected by their housing and covers which in construction and design adhere to the guidelines found in DIN 40 050 and are, therefore, protected against contact with motor parts either moving or alive (contact guards), penetration by extrinsic objects, and penetration of water. The motors must be stored in a dry, dust-free, and shock-free environment.
Wake Industrial Warranty
