Product Description

The Bosch Rexroth MAC090B-0-JD-2-F/110-A-0 AC servomotor functions like a rapid-response drive when it is used with the manufacturer's drive controller. This motor is delivered without a blocking brake. The product has no special design for its windings. This device has a tacho with increased smooth run quality. The unit portrays a length code of B. It is excited by permanent magnets. This motor deploys the tacho feedback to recognize the position of its rotor. The product has a plain output shaft on side A. This device has a defined assimilation of external forces on its shaft. The unit is equipped with a floating bearing on side A. It can be used with a mounting flange featuring windings for Design B14 mounting. The motor can be mounted horizontally as well as vertically. This product depicts a tacho voltage that matches its nominal speed. The device portrays an IP 65 protection class for its connectors and connecting cables. The unit should be installed at an elevation ranging from 0 to 1000 m above sea level. Its plastic protective covers on the connectors must be removed only just before mounting onto the machine. This motor cannot be used in residential machinery. The product has a standard centering diameter of 110 mm for its mounting flange. This device must be free of liquid accumulation around the output shaft. The unit has a permissible radial force that is calculated in terms of the point of application of force and the average speed. It must be ensured that the permissible force limits are not exceeded when it is in operation. This servomotor needs no blower connection to support its cooling mode. The product support angle as well as straight connectors for feedback.