Product Description

The MAC090B-0-JD-2-C/110-A-1 model is an AC motor and has a thermal time constant of 60 minutes. For safety in case of overload, thermal switches are installed in the motor that detects the varying temperature. Bosch Rexroth is the manufacturer of the MAC090B-0-JD-2-C/110-A-1 model. Bosch is a renowned brand worldwide in industrial automation solutions. The permanent magnet-excited motor has a mass of 18 kg. It provides a high degree of operational reliability due to brushless design and lifetime lubricated bearings. The rotor moment of inertia is 36 x 10-4 Nm and the toque constant of 0.41 Nm/A. It has a winding inductance of 2.0 mH and an inductance resistance of 0.38 Ohm. The MAC series motor is recommended for extreme operations such as material handling, robotics, and textiles. The IP 65 protection category stops the penetration of water and other extrinsic objects. For best performance, the maximum elevation is 1000 meters above sea level and ambient temperature between 0 °C to 45 °C is recommended. A tacho feedback is attached to the motor for better detection of speed and position. The power connector is attached to side A of the motor. The model comes with both plain and keyways output shaft. A high cyclic load capacity permits continuous start-stop operations with high repetition rates due to the electronic commutation of the motor. This MAC Series motor is available in the market with 6.5 Nm blocking brake. The motor is easy to install and can be installed in any possible orientation. The MAC090B-0-JD-2-C/110-A-1 motor has a rotor speed of 3000 rotations per minute. The special design of the stator brings excellent smooth-running qualities. The model is used for rapid-response servo drives in conjunction with TDM, KDS, and DSC drive controllers.