Product Description

This efficient model MAC090B-0-JD-2-C/110-A-0/S01 has tacho feedback (with second shaft end) and it must be used with the specified attachments and accessories. The 18-kilogram motor is suitable for machine tools, textile machinery, printing presses, packaging machinery, robotics, handling equipment, and transfer stations.

The MAC series AC servo motor?s power connection is located on the A side of the housing, and it must be stored between - 20 and + 70 degrees Celsius. The model has an insulation rating of F, and it must be positioned appropriately to reduce vibrations on the specified equipment. Often, vibrations limit motor efficiency. Permanent magnets allow the moment of inertia of the AC servo motor to be 18.2 x 10-4 kgm2. The model has an inductance of 2 mH and a thermal time constant of 45 minutes. The operating temperature range for the servo motor is 0 to + 45 degrees Celsius, and a maximum height of 1000 meters above sea level is permissible. The model has a winding resistance of 0.38 ohms and a centering diameter of 110 mm. The torque constant value for the motor is 0.41 Nm/A. The servo motor has a maximum peak of pulse current of 137 A.

The model MAC090B-0-JD-2-C/110-A-0/S01 is capable of producing 6.7 Nm of continuous torque while using 18.2 A of constant current under natural convection. The model housing is black and has an IP65 rating for protection against weather and corrosion. For exterior heat dissipation, the model (MAC090B-0-JD-2-C/110-A-0/S01) housing design permits natural cooling. When coupled with TDM, KDS, and DSC drive controllers, this MAC series AC servo motor produces a servo drive with a quick reaction. The holding brake is not available in this servo motor model.