Product Description

The model MAC090B-0-JD-1-B/110-A-0-100625 model has a 110 mm centering diameter and a power connection on its housing's A-side. The model has a winding resistance of 0.38 ohms and a moment of inertia of 18.2 x 10-4 kgm2 due to the use of permanent magnets.

The MAC090B AC servo motor's housing facilitates natural convection for exterior heat dissipation. All essential attachments and accessories must be employed correctly in order to run the model successfully. The model's insulation rating is F, and it must be placed properly to prevent vibrations on the specified equipment. The model's winding inductance is 2 mH, and the maximum permitted altitude is 1,000 meters above sea level. The 18-kilogram AC servo motor is well suited for machine tools, textile machinery, printing presses, packaging machinery, robotics, handling equipment, and transfer stations. The MAC series motor has a maximum peak of pulse current of 137 A. The thermal time constant value for the motor is 45 minutes. The thermal time constant indicates the time taken by the motor to cool down after an operation. The motor comes without a holding brake.

The model MAC090B-0-JD-1-B/110-A-0-100625 delivers a continuous torque output of 6.7 Nm when spinning at a high speed of 3000 meters per minute. This AC servo motor from the MAC series, when connected with TDM, KDS, and DSC drive controllers, delivers a servo drive with a rapid response. Integrated thermal switches in the windings of the motor monitor the motor's temperature to avoid overheating-related damage. The motor comes with a tacho feedback for rotor position determination. The housing of this Indramat motor (MAC090B-0-JD-1-B/110-A-0-100625) has been given an IP65 rating and is painted black to protect it from the elements and corrosion.