Product Description

The MAC090A-0-ZD-1-B/110-A-0/J625/S01 is an alternating industrial motor produced by the reputable Bosch Rexroth Indramat according to international motor quality and safety standards. This impressive motor has a compact and durable housing that is covered by a corrosion resistant coat and is resistant to all types of solid interference, and liquid splashes. The motor when used in combination with the TDM, KDS, or DSC Rexroth drive controller series forms a rapid response automatization system that can meet the operation requirements of printing presses, robotics, handling equipment and many other industrial production and processing machines. The motor rotor feature special permanent magnet that is made from materials, that makes it possible for the motor to maintain a very low inertial during operation.

The MAC090A-0-ZD-1-B/110-A-0/J625/S01 servo motor also features a tacho feedback that operates at a high resolution, allowing the drive controller to accurately keep a tap on the current operation status of the motor. At standstill, the continuous torque produced by this industrial servo motor is approximately 3.7 newton meters, the motor produce this torque while operating with a continuous input current of about 2000 revolutions per minute. The centering diameter of the MAC090A-0-ZD-1-B/110-A-0/J625/S01 motor is about 140 millimeters, the motor also has a total length of about 277 millimeters.

The output shaft integrated into this motor is design to support a high radial load, the shaft also has a shaft sealing ring that prevent the intrusion of water into the motor housing through the shaft. To maintain rated data and optimum motor operation, the MAC090A-0-ZD-1-B/110-A-0/J625/S01 motor should be used at an ambient temperature below 40 degree celsius. Also, the motor should not be installed at an elevation level that exceeds 1000 meters above sea level.