Product Description
The powerful AC (Alternate Current) servo motor MAC090A-0-RD-4-C/110-A-1/WA606XX/S010 is designed to withstand the demanding requirements of industrial applications. This motor provides precise control and practical operation with its rotor moment of inertia of 20 x 10 kgm, torque constant of 0.34 at 20?C, and windings resistance of 0.56 Ohm at the same weather conditions. It guarantees consistent performance across a range of operating circumstances attributable to its 3.2 mH winding inductance.
The robust casing of the MAC motors, which is lacquered in black, makes them resistant to severe circumstances. The primer offers safeguards against chalky build-ups, weathering, yellowing, and diluted lyes and acids. Nevertheless, the coat could peel if you use a steam machine too often. Thus, excessive use of steam is not recommended. In addition, mounting flanges with stipulated pilot diameters are available for compatibility with motors made by other manufacturers. INDRAMAT also recommends simple output shafts among the many output shaft varieties.
Certain variants have the option of mounting surface-cooling units to handle grave loads, such high-frequency, continuous start-stop operations. For this use, blower motors that run on either one x AC, Alternate Current 230 V or AC, Alternate Current, 115 V are available. In order to guarantee optimal performance, the motor needs to be ground in before use if it has been kept for longer than two years. In order to do this, the motor must be fueled at around 100 rpm, the holding brake has to be released for about 60 seconds, and the motor must then be rejoined to the hardware circuitry or PLC. In harsh industrial settings, adhering to these procedures safeguards the servo motor MAC090A-0-RD-4-C/110-A-1/WA606XX/S010's durability and dependability.
Wake Industrial Warranty
