Product Description

The MAC071C-0-NS-4-C/095-B-1/WA605XX is a servo motor manufactured by Rexroth Indramat. The minimum cross-sectional area of the copper conductors in the power cable is equal to 1.0 mm2. The crossectional area affects the resistance and the current-carrying capacity. The motor power cable INK 250 meets the electrical and mechanical requirements of this device. This module uses an incremental encoder model WA605XX. It converts the rotation of a shaft into a series of digital pulses. The holding torque of the brake is 6.5 Nm. It prevents the motor from turning when the motor is not powered.

This cools itself down by using surface cooling by blowing air over its surface. The blower used can be operated with either AC 230 V or AC 115 V and has a protection category of IP24. The blower is protected against solid particles larger than 12 mm and water sprayed from all directions. The blower has a mass of approximately 0.7 kg. The value of the voltage constant of the tacho generator is 0.0286 Vs/rad. This device generates 0.0286 volts for every radian per second of motor speed. It can also be expressed as 3 V/1000 RPM.

The Mass (mM) of this servo motor is 11 kg excluding the holding brake and blower. The permissible storage and transport temperature (TL) is -20 to +80 °C. The maximum installation elevation is 1000 meters above sea level. The Protection Category of this module is IP65. The insulation classification is F. This means the motor can withstand a temperature of 155 °C. The housing coat is a black prime coat (RAL 9005). The prime coat provides corrosion protection and a good surface for subsequent layers of paint. This servo motor comes with a one-year warranty for optimal performance assurance.