Product Description

Bosch Rexroth offers a vast selection of servo motors with varied power ratings for industrial automation. The company's servo motors are growing in popularity due to their excellent performance and long-lasting life. The MAC071C-0-NS-3-C/095-A-0 model has a power connector on the A side of its housing. The motor consumes a peak pulse current of 55 A and can rotate at a nominal speed of 3000 revolutions per minute. The MAC071C AC servo motor can generate a continuous torque of 6.6 Nm during at a standstill operation and consumes 11 A of continuous current. This motor is equipped with tachofeedback and second shaft end and is suited for stationary operation under weatherproof circumstances. For best performance, the model must be installed and operated by a skilled technician. The motor must be used between 0 and +45 degrees Celsius for optimal performance. The motor has an insulation class of F. The model has a thermal time constant of 45 minutes and uses natural convection to transfer heat outside. The MAC071C AC servo motor weighs 11 kilograms and is covered in primer-coated black housing for corrosion protection. However, the coat cannot exceed 40 millimeters in thickness. The model MAC071C-0-NS-3-C/095-A-0 has a winding inductance of 7 mH and is a member of the MAC series of AC servo motors made by Bosch Indramat Rexroth. There are thermal switches integrated within the motor's windings and stator housing. The dust and water protection level of the servo motor is IP65. The motor must be stored and transported between -20 to +80 degree centigrade. Wake Industrial offers the international distribution of this product (MAC071C-0-NS-3-C/095-A-0). The motor comes with a one-year replacement warranty.