Product Description

The MAC071C-0-NS-2-C/095-B-0 Bosch Rexroth AC servomotor comes with NS type windings. This servomotor features only a tacho feedback. The product is characterized by high dynamic performance. This device has a windings inductance of 3.5 mH. The unit incorporates a mounting flange with throughholes. It has a black prime RAL 9005 coat on its housing. This motor must be used only for standard applications. The product supports the inclusion of clamping sets and pressure sleeves on its output shaft. This device is delivered without a blocking brake to support its operation. The unit has a C length code. Its tacho voltage is set to match the nominal 3000 min-1 motor speed. This motor shaft is suitable for applications where the effects of a jet of water may be present. The product supports a radial force based on the point where force is applied and the average speed. This device has a power connector with its output direction facing the B side. The motor tends to get affected on side A featuring the output shaft because of thermal deformations in length. This unit must be grounded to the drive amplifier. It must be taken care to not use the output shaft to lift the motor. The servomotor related thermo switches are checked for their opening using hardware circuitry or a superordinate PLC. This product associated torque-speed characteristics help to ascertain if the application is within the thermal limits of the motor. The device achieves a maximum speed according to the DC bus voltage that gets generated by the supply source at the drive. The unit tends to become very hot during operation and may cause minor burns if touched. Its spigot nuts have a tightening torque of 2 Nm.