Product Description

The motor MAC071C-0-JS-3-C/095-B-0/8 has a thermal time constant of 45 minutes and it should be used between 0 and + 45 degrees Celsius. The weight of the motor is 11 kilograms and it can reach a maximum speed of 4000 revolutions per minute.

The model has a torque constant of 0.430 Nm/A. The resistance and inductance of the windings of the MAC series servo motor are 0.35 ohms and 3.5 mH, respectively. The IP65 protection certification and the F insulation class make this model appropriate for use in a wide range of applications even in harsh situations. The AC servo motor has a 95 mm centering diameter and an electrical connection on the B side of its housing. The servo motor has tacho feedback and a second shaft end. During the course of an operation, the model's enclosure disperses heat by employing natural convection. During natural convection, the MAC071C AC servo motor produces 6.6 Nm of continuous torque while using 15.3 A of constant current.

Thanks to the permanent magnets, the moment of inertia of the motor is 12.9 x 10-4 kgm2. Even if the MAC071C-0-JS-3-C/095-B-0/8 model is positioned at a height of one thousand meters above mean sea level, its performance will not deteriorate. The model must be stored within a temperature range of -20 to + 80 degrees centigrade. The installation and operations of this motor must be performed by a trained professional to get maximum efficiency. The model comes without a holding brake. If a holding brake is required, choose some other models that have a holding brake. When purchased from Wake Industrial, this efficient Indramat AC servo motor (MAC071C-0-JS-3-C/095-B-0/8) comes with a warranty.