Product Description

The MAC071C-0-GS-4-C/095-B-1/WA612XX/S001 might look petite on the outside with its 95 mm centering diameter and 292 mm motor frame. However, its powerful driving capabilities make it a beast at its core, capable of meeting continuous industrial demands. During no-load conditions, this motor model achieves a speed of 6,000 rev/min. Small to medium-size motors are more appropriate for high-speed applications requiring minimal torque. To fully maximize this motor’s loading capabilities, Rexroth Bosch recommends an installation level below 1000 m above sea level and an operating ambient temperature between 32 and 113 degrees Fahrenheit. With a protection category of IP 65 and insulation class F, the MAC071C-0-GS-4-C/095-B-1/WA612XX/S001 withstands even the most undesirable operating environments. 

The MAC071C-0-GS-4-C/095-B-1/WA612XX/S001 incorporates a standard blocking brake that initiates halting action when electrically released. At its prime condition, the blocking brake can halt a maximum torque of 3 Nm. During no-load operation, this blocking brake torque would suffice to halt the motor. However, in the stall condition, when the motor’s current is 22 A and the motor’s torque reaches as high as 6.6 Nm, the blocking brake is not advisable to use. During braking action, the holding brake draws a current of 0.6 A at a terminal voltage of 24 V. On average, the release action of the holding brake takes 30 milliseconds to complete. Meanwhile, the clamping action takes only a total of 15 milliseconds. 

The MAC071C-0-GS-4-C/095-B-1/WA612XX/S001 is best for applications requiring a high driving speed. The advantage of this motor model over all other models with the same rated speed is that the MAC071C-0-GS-4-C/095-B-1/WA612XX/S001 has an integrated blocking brake that allows the rotor to stay in place during de-energized states. When purchased at Wake Industrial, this motor model comes with an exclusive one-year product warranty.