Product Description

The Bosch Rexroth MAC071C-0-GS-3-C/095-A-0 AC servomotor must be handled and transported carefully to avoid the possibility of getting damaged. This servomotor should be lifted only in horizontal orientation. The product must be free of load during its transportation. This device has a rating plate attached to its housing. The unit related tacho feedback cable has poor adhesion that prevents sticking in drag chains. Its motor power cable has a cross-section of 2.5 mm2. This motor supports crimping type as well as soldering type power connectors. The product is equipped with a second shaft end on side B for additional feedback using the customer's encoder. This device houses a smooth plain shaft for non-positive shaft-hub connections. The unit has a reduced load capacity when it is operated between 45 ?C and 55 ?C. Its longitudinal axis has a maximum acceleration amplitude of 1 m/s2 with sinusoidal oscillations. This motor has a black prime coat over its housing. The product supports horizontal as well as vertical mounting as per DIN IEC 34-7 specifications. This device is not completely protected by the shaft sealing against the penetration of liquids along the output shaft into the housing. The unit has a standard pilot diameter for the mounting flange and no other option is available. Its quality of concentricity tends to get reduced when the bottom of the key of the shaft turns out due to powerful reverse operations. This servomotor supports a radial force based on the point where force is applied and the average speed. The product wiring must be done according to the terminal diagram of the machine manufacturer.