Product Description
The MAC071B-0-PS-4-C/095-B-0/WI520LV model has a thermal time constant of 45 minutes. Thermal time constant is the time taken by the motor to cool down after an operation. The servo motor generates a significant amount of torque of 4.4 Nm at a constant current consumption of 9.6 A. The MAC071B AC servo motor weighs 8.8 kilos and should only be installed and handled by an experienced expert.
The F insulation class and IP65 classification of this model make it appropriate for use in a range of harsh settings. The motor has a torque constant value of 0.460 Nm/A. The model performs at its optimum when it is subjected to temperatures ranging from 0 to + 45 degrees Celsius and altitudes ranging from 0 to 1000 meters above sea level. A layer of black paint forty micrometers thick is applied all over the surface of the motor, covering it completely. This serves the goal of safeguarding it from corrosion. The minimum resistance and inductance values for motor windings are 0.72 ohms and 5.9 mH, respectively. The MAC AC servo motor has a tacho feedback and a mounted or incremental encoder. The motor comes without a holding brake. Opt for other models if a holding brake is required.
The model MAC071B-0-PS-4-C/095-B-0/WI520LV has a rotational speed of 4000 revolutions per minute and must be kept between - 20 and +80 degrees Celsius. The motor's peak current is 48 A, while its moment of inertia is 9.9 x 10-4 kgm2. The model is compatible with the necessary machine. During operation, the motor housing dissipates heat through natural cooling. The Indramat motor (MAC071B-0-PS-4-C/095-B-0/WI520LV) features a 95 mm centering diameter and a B-side power connection.