Product Description

The MAC071B-0-PS-4-C/095-A-0/W1520LV/S001 AC servomotor by Bosch Rexroth is designed to be mounted as per Design IM B5. This servomotor is not intended to be used for extreme loads. The product has a tacho feedback of high resolution. This device is meant to be installed at a maximum elevation of 1000 m above sea level for optimum performance. The unit has an IP 65 protection rating. It is protected against the penetration of dust. This motor has a frequency range of 2 Hz to 9 Hz with excursion amplitude and sinusoidal oscillations. The product can be used for extremely demanding applications only if it features shock-decoupled or shock-damped mounting. This device can be mounted vertically with the output shaft pointing upwards or downwards. The unit has no blower for the cooling operation. Its mounting flange has a standard pilot diameter of 95 mm. This motor related shaft is ideal for form-fitting shaft-hub connections. The product associated cables can be directly connected to it with the help of connectors on the corresponding flanged sockets. This device can be used in stationary mode under weatherproofed conditions according to IEC 721-3-3 specifications. The unit is painted with a black prime coat on its housing. It should be ensured that there is no liquid entry into the housing along the shaft with IM V3 style mounting. This servomotor encounters a multi-axial stress state at the shaft-hub connection because of bending and torsion. The product encompasses a shaft sealing. This device has a radial force based on the average speed and the point of application of force. The unit must be run at a speed of approximately 100 rpm as part of the grind-in process. It is not possible to change the output direction of the power connector.